[1] 张齐生, 孙丰文. 我国竹材工业的发展展望[J]. 林产工业, 1999, 26(4): 3 − 5.

ZHANG Qisheng, SUN Fengwen. The development and prospect of bamboo industry in China [J]. China For Products Ind, 1999, 26(4): 3 − 5.
[2] 张建, 汪奎宏, 李琴, 等. 我国竹材利用率现状分析与建议[J]. 林业机械与木工设备, 2006, 34(8): 7 − 10.

ZHANG Jian, WANG Kuihong, LI Qin, et al. Status analysis and suggestions for bamboo utilization rate in China [J]. For Mach Woodworking Equip, 2006, 34(8): 7 − 10.
[3] 李延军, 许斌, 张齐生, 等. 我国竹材加工产业现状与对策分析[J]. 林业工程学报, 2016, 1(1): 2 − 7.

LI Yanjun, XU Bin, ZHANG Qisheng, et al. Present situation and the countermeasure analysis of bamboo timber precessing industry in China [J]. J For Eng, 2016, 1(1): 2 − 7.
[4] 林海. 竹展平方法: 201210257840.7[P]. 2014-07-16.
[5] 黄梦雪, 张文标, 张晓春, 等. 竹材软化展平研究及其进展[J]. 竹子研究汇刊, 2015, 34(1): 31 − 36.

HUANG Mengxue, ZHANG Wenbiao, ZHANG Xiaochun, et al. Advances in bamboo softening and flattening technology [J]. J Bamboo Res, 2015, 34(1): 31 − 36.
[6] 刘一星, 赵广杰. 木质资源材料学[M]. 北京: 中国林业出版社, 2004: 246 − 252.
[7] 黄艳文, 吴夏华, 钱俊. 不同竹龄、部位竹材经软化后的力学性能比较研究[J]. 竹子研究汇刊, 2015, 34(2): 40 − 46.

HUANG Yanwen, WU Xiahua, QIAN Jun. The comparison of mechanical properties of softening treated bamboos at various position and different age [J]. J Bamboo Res, 2015, 34(2): 40 − 46.
[8] 叶良明, 叶建华, 姜志宏, 等. 重组竹板材的研究:去青与不去青的比较[J]. 竹子研究汇刊, 1996, 15(1): 58 − 65.

YE Liangming, YE Jianhua, JIANG Zhihong, et al. Study on recombination of bamboo planks: comparison between green and non-green [J]. J Bamboo Res, 1996, 15(1): 58 − 65.
[9] 李大胜. 整竹去青技术及装备的研究[D]. 南京: 南京林业大学, 2004.

LI Dasheng. The Study of Technology and Equipment of Removing the Outer Green of Whole Bamboo[D]. Nanjing: Nanjing Forestry University, 2004.
[10] 邓健超, 张丹, 陈复明, 等. 竹束去青程度对竹束单板层积材物理力学性能的影响[J]. 东北林业大学学报, 2014, 42(12): 106 − 109.

DENG Jianchao, ZHANG Dan, CHEN Fuming, et al. Effect of bamboo green on physical and mechanical properties of laminated bamboo-bundle veneer lumber [J]. J Northeast For Univ, 2014, 42(12): 106 − 109.
[11] BOX G P, HUNTER W, STUARTHUNTER J. Statistics for Experimenters: An Introduction to Design, Data Analysis, and Model Building[M]. New York: Wiley, 2014.
[12] 葛宜元. 试验设计方法与Design-Expert软件应用[M]. 哈尔滨: 哈尔滨工业大学出版社, 2015.
[13] 刘红征, 王新洲, 李延军, 等. 竹筒无裂纹展平生产技术[J]. 林产工业, 2018, 45(5): 41 − 45.

LIU Hongzheng, WANG Xinzhou, LI Yanjun, et al. Manufacturing technique of crack-free flattened bamboo tube [J]. China For Prod Ind, 2018, 45(5): 41 − 45.