圆形孔洞对木梁承载能力的影响研究

刘洪潮; 胡潇毅; 刘洪潮; 胡潇毅

doi:10.11833/j.issn.2095-0756.20250389

[1]

郑文涛, 陈晶华, 李田. 孔洞对疲劳裂纹扩展路径的影响[J]. 沈阳工业大学学报, 2024, 46(2): 177−183. ZHENG Wentao, CHEN Jinghua, LI Tian. Influence of holes on fatigue crack propagation path[J]. Journal of Shenyang University of Technology, 2024, 46(2): 177−183. DOI: 10.7688/j.issn.1000-1646.2024.02.10.

ZHENG Wentao, CHEN Jinghua, LI Tian. Influence of holes on fatigue crack propagation path[J]. Journal of Shenyang University of Technology, 2024, 46(2): 177−183. DOI: 10.7688/j.issn.1000-1646.2024.02.10.

[2]

寇佩佩, 冯瑞成, 李海燕, 等. 孔洞对含Nb单晶β-TiAl合金力学性能的影响[J]. 材料导报, 2020, 34(14): 14140−14146. KOU Peipei, FENG Ruicheng, LI Haiyan, et al. Effect of voids on mechanical properties of single crystal β-TiAl alloy containing Nb[J]. Materials Review, 2020, 34(14): 14140−14146. DOI: 10.11896/cldb.19070089.

KOU Peipei, FENG Ruicheng, LI Haiyan, et al. Effect of voids on mechanical properties of single crystal β-TiAl alloy containing Nb[J]. Materials Review, 2020, 34(14): 14140−14146. DOI: 10.11896/cldb.19070089.

[3]

LEE E, JIA Zian, YANG Ting, et al. Multiscale mechanical design of the lightweight, stiff, and damage-tolerant cuttlebone: a computational study[J]. Acta Biomaterialia, 2022, 154: 312−323. DOI: 10.1016/j.actbio.2022.09.057.

[4]

MA Chunyang, DU Tianming, NIU Xufeng, et al. Biomechanics and mechanobiology of the bone matrix[J]. Bone Research, 2022, 10: 59. DOI:10.1038/s41413-022-00223-y.

[5]

NIKNEJAD E, JAFARI R, VALIPOUR MOTLAGH N. Mechanical properties of biodegradable fibers and fibrous mats: a comprehensive review[J]. Molecules, 2025, 30(15): 3276. DOI:10.3390/molecules30153276.

[6]

ZHANG Xiaofang, YUAN Yanan. Synergistic enhancement of strength and toughness through meta-biomimetic design: integrating crossed-lamellar and bouligand microstructures[J]. Composites Science and Technology, 2024, 254: 110668. DOI:10.1016/j.compscitech.2024.110668.

[7]

OLHAN S, ANTIL B, KHATKAR V, et al. Mechanical, thermal, and viscoelastic behavior of sisal fibre-based structural composites for automotive applications: experimental and FEM analysis[J]. Composite Structures, 2023, 322: 117427. DOI:10.1016/j.compstruct.2023.117427.

[8]

陈勇平, 郭文静, 唐启恒. 基于雷达检测的木材内部孔洞面积测算与修正[J]. 浙江农林大学学报, 2020, 37(6): 1193−1199. CHEN Yongping, GUO Wenjing, TANG Qiheng. Calculation and correction of wood internal cavity area based on radar detection[J]. Journal of Zhejiang A&F University, 2020, 37(6): 1193−1199. DOI: 10.11833/j.issn.2095-0756.20190709.

CHEN Yongping, GUO Wenjing, TANG Qiheng. Calculation and correction of wood internal cavity area based on radar detection[J]. Journal of Zhejiang A&F University, 2020, 37(6): 1193−1199. DOI: 10.11833/j.issn.2095-0756.20190709.

[9]

XU Ning, LI Ming, FANG Saiyin, et al. Research on the detection of the hole in wood based on acoustic emission frequency sweeping[J]. Construction and Building Materials, 2023, 400: 132761. DOI: 10.1016/j.conbuildmat.2023.132761.

[10]

钟慧娴, 袁霄, 陈勇平. 木结构古建筑常见虫害特征及防治分析[J]. 木材科学与技术, 2022, 36(3): 96−100. ZHONG Huixian, YUAN Xiao, CHEN Yongping. Characteristics and prevention of common pests in ancient wooden buildings[J]. Chinese Journal of Wood Science and Technology, 2022, 36(3): 96−100. DOI: 10.12326/j.2096-9694.2021131.

ZHONG Huixian, YUAN Xiao, CHEN Yongping. Characteristics and prevention of common pests in ancient wooden buildings[J]. Chinese Journal of Wood Science and Technology, 2022, 36(3): 96−100. DOI: 10.12326/j.2096-9694.2021131.

[11]

李明月, 陈东升, 王雪玉, 等. 节子的性质及其对木材材性的影响[J]. 西北林学院学报, 2020, 35(4): 197−204. LI Mingyue, CHEN Dongsheng, WANG Xueyu, et al. Properties of knots and their effects on wood properties[J]. Journal of Northwest Forestry University, 2020, 35(4): 197−204. DOI: 10.3969/j.issn.1001-7461.2020.04.31.

LI Mingyue, CHEN Dongsheng, WANG Xueyu, et al. Properties of knots and their effects on wood properties[J]. Journal of Northwest Forestry University, 2020, 35(4): 197−204. DOI: 10.3969/j.issn.1001-7461.2020.04.31.

[12]

唐践扬, 宋晓滨, 郭宇, 等. 钻孔导致孔边木材残余变形和弹塑性损伤研究[J]. 建筑结构学报, 2023, 44(10): 114−122. TANG Jianyang, SONG Xiaobin, GUO Yu, et al. Study on residual deformation and elastic-plastic damage of wood near hole caused by drilling[J]. Journal of Building Structures, 2023, 44(10): 114−122. DOI: 10.14006/j.jzjgxb.2022.0178.

TANG Jianyang, SONG Xiaobin, GUO Yu, et al. Study on residual deformation and elastic-plastic damage of wood near hole caused by drilling[J]. Journal of Building Structures, 2023, 44(10): 114−122. DOI: 10.14006/j.jzjgxb.2022.0178.

[13]

刘勇. 品读应县木塔[J]. 中国测绘, 2019(8): 76−80. LIU Yong. Reading Yingxian wooden pagoda[J]. China Surveying and Mapping, 2019(8): 76−80.

LIU Yong. Reading Yingxian wooden pagoda[J]. China Surveying and Mapping, 2019(8): 76−80.

[14]

温宇鑫, 赵健, 赵东. 孔洞对木梁弯曲应变分布影响的试验研究[J]. 北京林业大学学报, 2017, 39(11): 106−113. WEN Yuxin, ZHAO Jian, ZHAO Dong. Experimental study on the effects of holes on bending strain distribution of wood beams[J]. Journal of Beijing Forestry University, 2017, 39(11): 106−113. DOI: 10.13332/j.1000-1522.20170221.

WEN Yuxin, ZHAO Jian, ZHAO Dong. Experimental study on the effects of holes on bending strain distribution of wood beams[J]. Journal of Beijing Forestry University, 2017, 39(11): 106−113.

[15]

OKAMOTO S, AKIYAMA N, ARAKI Y, et al. Study on the strength of glued laminated timber beams with round holes: difference in structural performance between homogeneous-grade and heterogeneous-grade timber[J]. Journal of Wood Science, 2021, 67(1): 8. DOI:10.1186/s10086-021-01941-3.

[16]

DANIELSSON H, GUSTAFSSON P J. A probabilistic fracture mechanics method and strength analysis of glulam beams with holes[J]. European Journal of Wood and Wood Products, 2011, 69(3): 407−419. DOI: 10.1007/s00107-010-0475-1.

[17]

BUKSNOWITZ C, HACKSPIEL C, HOFSTETTER K, et al. Knots in trees: strain distribution in a naturally optimised structure[J]. Wood Science and Technology, 2010, 44(3): 389−398. DOI: 10.1007/s00226-010-0352-4.

[18]

PARRACHA J L, PEREIRA M F C, MAURÍCIO A, et al. A semi-destructive assessment method to estimate the residual strength of maritime pine structural elements degraded by anobiids[J]. Materials and Structures, 2019, 52(3): 54. DOI:10.1617/s11527-019-1354-9.

[19]

刘海笑, 张楚汉, 周锡礽. 冲击作用下含孔洞纤维增强复合材料平板的动力学实验与数值研究[J]. 爆炸与冲击, 2000, 20(4): 313−318. LIU Haixiao, ZHANG Chuhan, ZHOU Xireng. Experimental and numerical study on fiber reinforced comp osite plate with cavity under impact loading[J]. Explosion and Shock Waves, 2000, 20(4): 313−318. DOI: 10.3321/j.issn:1001-1455.2000.04.004.

LIU Haixiao, ZHANG Chuhan, ZHOU Xireng. Experimental and numerical study on fiber reinforced comp osite plate with cavity under impact loading[J]. Explosion and Shock Waves, 2000, 20(4): 313−318. DOI: 10.3321/j.issn:1001-1455.2000.04.004.

[20]

陈斌, 王崇恩. 多孔砖孔型及孔洞率有限元优化研究[J]. 新型建筑材料, 2019, 46(9): 141−144. CHEN Bin, WANG Chongen. Finite element optimization of pore patterns and pore rate of porous bricks[J]. New Building Materials, 2019, 46(9): 141−144. DOI: 10.3969/j.issn.1001-702X.2019.09.034.

CHEN Bin, WANG Chongen. Finite element optimization of pore patterns and pore rate of porous bricks[J]. New Building Materials, 2019, 46(9): 141−144. DOI: 10.3969/j.issn.1001-702X.2019.09.034.

[21]

CHEN Jiaji, XIE Hui, LIU Lingzhi, et al. Strengthening gold with dispersed nanovods [J]. Science, 2024, 385(6709): 629−633. DOI: 10.1126/science.abo7579.

[22]

成俊卿, 杨家驹, 刘鹏. 中国木材志[M]. 北京: 中国林业出版社, 1992: 67−694. CHENG Junqing, YANG Jiaju, LIU Peng. Wood Records of China[M]. Beijing: China Forestry Publishing House, 1992: 67−694.

CHENG Junqing, YANG Jiaju, LIU Peng. Wood Records of China[M]. Beijing: China Forestry Publishing House, 1992: 67−694.

[23]

RICARDO SANTOS COIMBRA P, DE SOUZA ALMEIDA A, HENDRIGO DE ALMEIDA T, et al. Stress distribution in tauari wood beam[J]. International Journal of Materials Engineering, 2018, 8(1): 5−11. DOI: 10.5923/j.ijme.20180801.02.

[24]

WEN Yuxin, YANG Ping, ZHAO Jian, et al. Theoretical and experimental considerations on the neutral axis of wood beams with a hole in different locations[J]. Holzforschung, 2018, 72(9): 769−777. DOI: 10.1515/hf-2017-0174.

[25]

何盛. 樟子松指接材有限元模型分析研究[D]. 南京: 南京林业大学, 2011. HE Sheng. Study of Finite Element Modeling Analysis for Pinus sylvestris L. var. mongolica Litv. Finger-jointed Lumber[D]. NanJing: Nanjing Forestry University, 2011.

HE Sheng. Study of Finite Element Modeling Analysis for Pinus sylvestris L. var. mongolica Litv. Finger-jointed Lumber[D]. NanJing: Nanjing Forestry University, 2011.