[1] RICHTER K, FEIST W C, KNAEBE M T. The effect of surface roughness on the performance of finishes (Ⅰ) roughness characterization and stain performance [J]. For Prod J, 1995, 45(7/8): 91-97.
[2] 郝文弢, 张占宽, 李黎.无支撑条状刷式砂光工艺参数对薄木表面粗糙度的影响[J].木材工业, 2013, 27(3): 34-37.

HAO Wentao, ZHANG Zhankuan, LI Li. Effect of sanding parameter on sliced veneers surface roughness using brush sander without upholder [J]. China Wood Ind, 2013, 27(3): 34-37.
[3] 贺宏奎, 李浩东, 傅鹏.竹材磨削表面粗糙度与胶合强度关系的研究[J].西北农林科技大学学报(自然科学版), 2011, 39(4): 77-80, 88.

HE Hongkui, LI Haodong, FU Peng. Study on the relationship between bonding strength and roughness of sanding bamboo surface [J]. J Northwest A & F Univ Nat Sci Ed, 2011, 39(4): 77-80, 88.
[4] 曹欢玲, 张蔚, 范兴铎, 等.刨切薄竹材砂光表面粗糙度测量与分析[J].木材加工机械, 2011, 22(6): 8-10.

CAO Huanling, ZHANG Wei, FAN Xingduo, et al. Thin bamboo sanding surface roughness measurement and analysis [J]. Wood Proc Mach, 2011, 22(6): 8-10.
[5] 孙媛, 李黎.木材磨削表面粗糙度对胶合强度的影响[J].木材加工机械, 2010, 21(3): 41-43.

SUN Yuan, LI Li. Effect on bonding strength of surface roughness of sanding wood [J]. Wood Proc Mach, 2010, 21(3): 41-43.
[6] 李浩东, 李黎.磨削木竹材表面粗糙度对胶合强度的影响[J].木材加工机械, 2009, 20(1): 4-8, 11.

LI Haodong, LI Li. Effect on bonding strength of sanding surface roughness of wood and bamboo [J]. Wood Proc Mach, 2009, 20(1): 4-8, 11.
[7] 江泽慧, 于文吉, 叶克林.探针法测量与分析竹材表面粗糙度[J].木材工业, 2001, 15(5): 14-16.

JIANG Zehui, YU Wenji, YE Kelin. Analysis of bamboo surface roughness by stylus method [J]. China Wood Ind, 2001, 15(5): 14-16.
[8] 杨永福, 李黎, 武丽清.毛竹物理性质对刨切表面质量的影响[J].北京林业大学学报, 2008, 30(1): 133-136.

YANG Yongfu, LI Li, WU Liqing. Effects of physical properties of moso bamboo on planning surface [J]. J Bejing For Univ, 2008, 30(1): 133-136.
[9] 武丽清, 杨永福.切削厚度对竹材刨切质量影响的研究[J].木材加工机械, 2006, 17(1): 15-18.

WU Liqing, YANG Yongfu. Study on the effects of cutting thickness of bamboo on its cutting quality [J]. Wood Proc Mach, 2006, 17(1): 15-18.
[10] 王明枝, 王洁瑛, 李黎.木材表面粗糙度的分析[J].北京林业大学学报, 2005, 27(1): 14-18.

WANG Mingzhi, WANG Jieying, LI Li. Roughness and roughness sense of wood surface from different machining processes [J]. J Bejing For Univ, 2005, 27(1): 14-18.
[11] 彭立民, 王金林.集成薄木制造工艺研究[J].木材工业, 2004, 18(5): 11-14.

PENG Limin, WANG Jinlin. A study on processing edge jointed veneer [J]. China Wood Ind, 2004, 18(5): 11-14.
[12] 李光耀, 吕泽军, 刘志坤.高含水率木材指榫连接后主要力学性能初探[J].西北林学院学报, 2015, 30(3): 224-227.

LI Guangyao, LÜ Zejun, LIU Zhikun. A preliminary study on the main mechanical properties of the high moisture content of wood after finger-jointed [J]. J Northwest For Univ, 2015, 30(3): 224-227.