[1] 查瑶, 饶俊, 关莹, 等. 竹叶/HDPE复合材料的制备及性能[J]. 浙江农林大学学报, 2020, 37(2): 343 − 349.

ZHA Yao, RAO Jun, GUAN Ying, et al. Preparation and properties of bamboo leaf/HDPE composites [J]. Journal of Zhejiang A&F University, 2020, 37(2): 343 − 349.
[2] 杜春贵, 魏金光, 金春德, 等. 竹碎料/酚醛树脂制备竹材陶瓷的烧结工艺[J]. 浙江农林大学学报, 2016, 33(3): 471 − 476.

DU Chungui, WEI Jinguang, JIN Chunde, et al. Sintering process of bamboo ceramics prepared from bamboo chips/phenolic resin [J]. Journal of Zhejiang A&F University, 2016, 33(3): 471 − 476.
[3]

ROSENTHAL M, HENNEBERGER C, GUTKES A, et al. Liquid deposition modeling: a promising approach for 3D printing of wood [J]. European Journal of Wood and Wood Products, 2018, 76(2): 797 − 799.
[4] 闫承琳, 刘子昕, 刘东, 等. 基于黏结剂喷射的木质材料增材制造技术研究进展[J]. 世界林业研究, 2023, 36(1): 90 − 96.

YAN Chenglin, LIU Zixin, LIU Dong, et al. Research progress in additive manufacturing technology for wood materials based on 3DP [J]. World Forestry Research, 2023, 36(1): 90 − 96.
[5]

GAO Xiangyu, YANG Weidong, XIAN Hongxuan, et al. Numerical simulation of multi-layer penetration process of binder droplet in 3DP technique [J]. Computer Modeling in Engineering &Sciences, 2020, 124(1): 227 − 241.
[6]

HADI M, NIKNAM M, LI Yang. Effect of powder characteristics on parts fabricated via binder jetting process [J]. Rapid Prototyping Journal, 2019, 25(2): 332 − 342.
[7]

DENESUK M, SMITH G L, ZELINSKI B J J, et al. Capillary penetration of liquid droplets into porous materials [J]. Journal of Colloid and Interface Science, 1993, 158(1): 114 − 120.
[8]

NEFZAOUI E, SKURTYS O. Impact of a liquid drop on a granular medium: inertia, viscosity and surface tension effects on the drop deformation [J]. Experimental Thermal and Fluid Science, 2012, 41: 43 − 50.
[9] 雷永杰, 周建波, 傅万四, 等. 竹材索道集材运输装备跑车及悬索的设计与分析[J]. 浙江农林大学学报, 2023, 40(6): 1348 − 1356.

LEI Yongjie, ZHOU Jianbo, FU Wansi, et al. Design and analysis of bamboo cableway skidding transportation equipment sports car and suspension cable [J]. Journal of Zhejiang A&F University, 2023, 40(6): 1348 − 1356.
[10] 路崧, 江海, 顾守东, 等. 液压式压电驱动喷射点胶阀设计与实验[J]. 四川大学学报(工程科学版), 2015, 47(3): 167 − 173.

LU Song, JIANG Hai, GU Shoudong, et al. Experiment and design for the hydraumatic piezoelectric driven jet dispensing value [J]. Journal of Sichaun University (Engineering Science Edition), 2015, 47(3): 167 − 173.
[11] 张伏, 付三玲, 佟金, 等. 玉米淀粉糊的流变学特性分析[J]. 农业工程学报, 2008, 24(9): 294 − 297.

ZHANG Fu, FU Sanling, TONG Jin, et al. Rheological properties of maize starch pastes [J]. Transactions of the Chinese Society of Agricultural Engineering, 2008, 24(9): 294 − 297.
[12] 黄强强, 闫宝瑞, 汪扬烨, 等. 高聚物熔滴形成与断裂过程的数值模拟[J]. 北京化工大学学报(自然科学版), 2017, 44(1): 63 − 68.

HUANG Qiangqiang, YAN Baorui, WANG Yangye, et al. Numerical simulation of formation and fracture process in polymer droplets [J]. Journal of Beijing University of Chemical Technology (Natural Science), 2017, 44(1): 63 − 68.
[13] 闫大壮, 杨培岭, 赵桥. 滴头流道内部含沙水流流动特征的试验研究[J]. 农业工程学报, 2008, 24(2): 52 − 56.

YAN Dazhuang, YANG Peiling, ZHAO Qiao. Experimental study on suspensions flow hydraulic characteristics in dripper emitter path [J]. Transactions of the Chinese Society of Agricultural Engineering, 2008, 24(2): 52 − 56.
[14] 陈学锋, 徐言生, 胡建国, 等. 聚合物熔体二维非等温脉动流场模型[J]. 塑料, 2015, 44(2): 85 − 88.

CHEN Xuefeng, XU Yansheng, HU Jianguo, et al. Models of 2D non-isothermal pulsating flow of polymer melt [J]. Plastics, 2015, 44(2): 85 − 88.
[15] 卢富明, 范雪琪, 丁雨晴, 等. 双向侧风木材干燥窑内流场的数值模拟与优化[J]. 林产工业, 2023, 60(1): 33 − 39.

LU Fuming, FAN Xueqi, DING Yuqing, et al. Numerical simulation and optimization of the flow field in bilateral side-fan wood drying kiln [J]. China Forest Products Industry, 2023, 60(1): 33 − 39.
[16] 刘东, 刘子昕, 王琦, 等. 基于离散元的竹粉颗粒接触参数标定[J]. 浙江农林大学学报, 2023, 40(4): 875 − 882.

LIU Dong, LIU Zixin, WANG Qi, et al. Calibration of contact parameters for bamboo powder particles based on DEM [J]. Journal of Zhejiang A&F University, 2023, 40(4): 875 − 882.
[17] 陈恒, 杨俊逸, 张志航, 等. 气动喷射点胶CFD仿真与实验研究[J]. 科学技术与工程, 2017, 17(31): 94 − 100.

CHEN Heng, YANG Junyi, ZHANG Zhihang, et al. CFD simulation and experimental study on pneumatic jetting [J]. Science Technology and Engineering, 2017, 17(31): 94 − 100.