[1] 李贤军, 傅峰, 蔡智勇, 等.高温热处理对木材吸湿性和尺寸稳定性的影响[J].中南林业科技大学学报, 2010, 30(6):92-96.

LI Xianjun, FU Feng, CAI Zhiyong, et al. The effect of high temperature thermal treatment on moisture absorption and dimension stability of wood[J]. J Cent South Univ For & Technol, 2010, 30(6):92-96.
[2]

FYHR C, RASMUSON A. Some aspects of the modelling of wood chips drying in superheated steam[J]. Int J Heat Mass Transfer, 1997, 40(12):2825-2842.
[3]

PANG S. Relative importance of vapour diffusion and convective flow in modeling of softwood drying[J]. Drying Technol, 1998, 16(1/2):271-281.
[4]

PANG S, LANGRISH T A G, KEEY R B. Moisture movement in softwood timber at elevated temperature[J]. Drying Technol, 1994, 12(8):1897-1914.
[5] 阳财喜, 阎昊鹏, 刘君良.桉树真空热处理材表面性能分析[J].林业科学, 2010, 46(10):130-134.

YANG Caixi, YAN Haopeng, LIU Junliang. Surface performance of Eucalyptus lumber after vacuum-heat treatment[J]. Sci Silv Sin, 2010, 46(10):130-134.
[6] 李龙哲, 阳财喜, 刘君良.桉树木材的浸渍增强热处理技术[J].木材工业, 2009, 23(3):40-42.

LI Longzhe, YANG Caixi, LIU Junliang. Performance of Eucalyptus lumber after resin impregnation and heat treatment[J]. China Wood Ind, 2009, 23(3):40-42.
[7] 谢桂军, 苏海涛, 张燕君, 等.真空热处理马尾松木材物理性能研究[J].广东林业科技, 2009, 25(3):42-45.

XIE Guijun, SU Haitao, ZHANG Yanjun, et al. Research on physical and mechanical properties of heat-modified Massson Pine by vacuum treating[J]. J Guangdong For Sci Technol, 2009, 25(3):42-45.
[8]

DAI Chunping, YU Changming, ZHOU Xiaoyan, et al. Heat and mass transfer in wood composite panels during hot pressing(Part 4) Experimental investigation and model validation[J]. Holzforschung, 2007, 61(1):83-88.
[9]

LEIKER M, ADAMAKA M A. Energy efficiency and drying vacuum microwave drying of wood[J]. Eur J Wood Prod, 2004, 62(3):203-208.
[10]

YOUNSI R, KOCAEFE D, PONCSAK S, et al. Computational modeling of heat and mass transfer during the high-temperature heat treatment of wood[J]. Appl Thenm Eng, 2007, 27(8):1424-1431.
[11]

WANG Xuehua, LIU Junliang, XU Guoqi, et al. Microstructure of Eucalyptus pellita under different thermal treatment temperatures and its effect on physical-mechanical characteristic[J]. Adv Mater Res, 2011, 214:544-548.
[12] 杨庆贤.木材热学参数的理论表达式[J].福建林学院学报, 2001, 21(4):329-331.

YANG Qingxian. Theoretical expressions of wood thermal parameter[J]. J Fujian Coll For, 2001, 21(4):329-331.