Effects of production factors on formaldehyde emission of E<sub>1</sub> humid resistant medium density fiberboard

SHEN Zhe-hong; JIANG Nian-chun; CHEN Li; LI Wen-zhu; YU You-ming

Volume 22 Issue 2

Feb. 2017

Turn off MathJax

Article Contents

Article Navigation > Journal of Zhejiang A&F University > 2005 > 22(2): 203-206

SHEN Zhe-hong, JIANG Nian-chun, CHEN Li, LI Wen-zhu, YU You-ming. Effects of production factors on formaldehyde emission of E1 humid resistant medium density fiberboard[J]. Journal of Zhejiang A&F University, 2005, 22(2): 203-206.

Citation:

SHEN Zhe-hong, JIANG Nian-chun, CHEN Li, LI Wen-zhu, YU You-ming. Effects of production factors on formaldehyde emission of E₁ humid resistant medium density fiberboard[J]. Journal of Zhejiang A&F University, 2005, 22(2): 203-206.

Effects of production factors on formaldehyde emission of E₁ humid resistant medium density fiberboard

1.
School of Engineering , Zhejiang Forestry College , Lin'an 311300, Zhejiang , China;
2.
Forest Station of Kaihua County , Kaihua 324300 , Zhejiang , China;
3.
Forest Enterpries of Pingyang County , Pingyang 325400 , Zhejiang , China

Funds:

浙江省教育厅资助项目(2411003052)

Received Date: 2004-05-31
Rev Recd Date: 2004-12-21
Publish Date: 2005-06-20

Abstract

Low toxin urea formaldehyde resin modified with melamine formaledhyde should be used in order to produce E1 humid resistant MDF .Resin load increasing can reduce formaldehyde emission .11 %～ 13 %resin load was fit .The increase of hot-pressing temperature and hot-pressing time also can reduce the formaldehyde emission . The formaldehyde emission of MDF decreased with the increase of MDF thickness .When thickness is 16 mm , the proper hot-press temperature was 190 ℃and hot-press time was 25 smm-1 the products would be satisfied .[ Ch , 4 fig .1 tab .7 ref .]
- forest engineering,
- E1 humid resistant MDF,
- formaldehyde emission,
- resin loading,
- hot pressing,
- panel thickness,
- urea resin

Relative Article

[1]	XU Bin, WANG Hengxu, LU Jie, FU Shenyuan, DAI Jinfeng. Preparation and performance evaluation of bamboo scrimber/glass fiber/PET foam multilayer structural insulated panel . Journal of Zhejiang A&F University, 2021, 38(2): 396-402. doi: 10.11833/j.issn.2095-0756.20200330
[2]	DING Tingting, LI Qian, JIN Zhenfu. Effects of lignin and brominated lignin on the thermal properties of epoxy resin . Journal of Zhejiang A&F University, 2018, 35(3): 562-566. doi: 10.11833/j.issn.2095-0756.2018.03.023
[3]	TRAN Minh Toi, WU Jinrong, CHEN Xiaoyi, DENG Yuhe, WANG Xinzhou, HE Shuangshuang, YU Wangwang, ZHANG Jian. Properties of Salix discolor scrimber . Journal of Zhejiang A&F University, 2016, 33(4): 658-666. doi: 10.11833/j.issn.2095-0756.2016.04.015
[4]	XI Xuedong, LEI Hong, DU Guanben, WU Zhigang, CAO Ming, LIAO Jingjing. Cold-setting MUF resin adhesive prepared with concentrated fomaldehyde . Journal of Zhejiang A&F University, 2016, 33(2): 300-305. doi: 10.11833/j.issn.2095-0756.2016.02.016
[5]	LI Guangrong, GU Zhongchun, LI Junzhang, DU Yeyun. Plant protein based adhesive for particleboard . Journal of Zhejiang A&F University, 2015, 32(6): 909-913. doi: 10.11833/j.issn.2095-0756.2015.06.013
[6]	WU Jinrong, DENG Yuhe, HOU Tianyu, WANG Xinzhou, CHEN Xiaoyi, ZHANG Jian, CHEN Mingji. Salix discolor crotches and its scrimber . Journal of Zhejiang A&F University, 2014, 31(6): 947-953. doi: 10.11833/j.issn.2095-0756.2014.06.018
[7]	LI Xiaoping, WU Zhangkang, ZOU Quan, ZHANG Qingwei. Flammability of particleboard paneling using resins and fire retardants . Journal of Zhejiang A&F University, 2014, 31(5): 739-744. doi: 10.11833/j.issn.2095-0756.2014.05.012
[8]	PHAM Tuong Lam, WANG Xinzhou, DENG Yuhe, DONG Geping, TRAN Minh Toi, CAO Quoc An. Characteristics of recycled poplar cement formwork fiber and its fiberboard manufacturing . Journal of Zhejiang A&F University, 2014, 31(6): 940-946. doi: 10.11833/j.issn.2095-0756.2014.06.017
[9]	YU Le, Lü Jianxiong, LI Xianjun, XU Kang, WU Yiqiang, JIANG Jiali. Comparison of X-ray scanning and slice methods for moisture distribution measurements when drying Cunninghamia lanceolata plantation wood . Journal of Zhejiang A&F University, 2013, 30(4): 543-547. doi: 10.11833/j.issn.2095-0756.2013.04.013
[10]	YAN Hai-cheng, ZHANG Hou-jiang, ZHU Lei, SUN Yan-liang, LIU Xiang-xi. Dynamic and static modulus measurements for thin particleboard . Journal of Zhejiang A&F University, 2012, 29(1): 83-87. doi: 10.11833/j.issn.2095-0756.2012.01.015
[11]	SHANG Na-na, YE Xiao, HUANG Li-shuang, JIN Zhen-fu. Lignin characteristics of steam exploded bamboo residue during hot pressing . Journal of Zhejiang A&F University, 2012, 29(3): 420-425. doi: 10.11833/j.issn.2095-0756.2012.03.015
[12]	DU Chun-gui, ZHANG Qi-sheng, LIU Zhi-kun, CHEN Si-guo. Distribution characteristics of horizontal density of Chinese fir oriented laminated stick lumber （OLSL） . Journal of Zhejiang A&F University, 2009, 26(4): 455-460.
[13]	DU Chun-gui, LIU Zhi-kun, ZHANG Qi-sheng. Using rolling pressure on sawmill slabs of Chinese fir (Cunninghamia lanceolata) to form a combing processing blank . Journal of Zhejiang A&F University, 2008, 25(3): 267-271.
[14]	WEI Qi-hua, TONG Ling, CHEN Nai-rong, LIN Qiao-jia. Adhesive properties of a soy-based wood adhesive using sodium dodecyl sulfate . Journal of Zhejiang A&F University, 2008, 25(6): 772-776.
[15]	LI Pei-xian, CHEN Min, XIE Ji-min, ZHU Jian-jun. Making glyphosate microcapsules by in-situ polymerization . Journal of Zhejiang A&F University, 2008, 25(3): 350-354.
[16]	JI Wei-bing, YAO Wen-bin, MA Ling-fei. Analysis on gradual mechanical properties by the depth of bamboo wall of Dendrocalamus giganteus and Dendrocalamopsis oldhami . Journal of Zhejiang A&F University, 2007, 24(2): 125-129.
[17]	BAO Bin-fu, SHA Cun-long, YU Wen-jun, JIANG Zhi-hong, YU You-ming, YU Xue-jun. Effects of final treatment techniques on the properties of fast curing cement particle board . Journal of Zhejiang A&F University, 2006, 23(3): 237-241.
[18]	SUN Zhao-bin, CHEN Tai-an, DENG Qi-ping. Hot pressing technology for Dendrocalamus giganteus bamboo wood . Journal of Zhejiang A&F University, 2006, 23(4): 424-428.
[19]	BAO Bin-fu, YU Wen-jun, JIANG Zhi-hong, YU You-ming. Effect of hot-pressing temperature and natural curing time on properties of fast-curing cement particle board . Journal of Zhejiang A&F University, 2006, 23(2): 129-134.
[20]	SHEN Zhe-hong, XU Shao-yuan. Processing technology of Camtpotheca acuminata plywood . Journal of Zhejiang A&F University, 2001, 18(3): 274-277.

References
Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article views(1558) PDF downloads(301) Cited by()

Proportional views

Effects of production factors on formaldehyde emission of E₁ humid resistant medium density fiberboard

1. School of Engineering , Zhejiang Forestry College , Lin'an 311300, Zhejiang , China;

2. Forest Station of Kaihua County , Kaihua 324300 , Zhejiang , China;

3. Forest Enterpries of Pingyang County , Pingyang 325400 , Zhejiang , China

Funds:

浙江省教育厅资助项目(2411003052)

Received Date: 2004-05-31

Rev Recd Date: 2004-12-21

Publish Date: 2005-06-20

Key words:

Abstract: Low toxin urea formaldehyde resin modified with melamine formaledhyde should be used in order to produce E1 humid resistant MDF .Resin load increasing can reduce formaldehyde emission .11 %～ 13 %resin load was fit .The increase of hot-pressing temperature and hot-pressing time also can reduce the formaldehyde emission . The formaldehyde emission of MDF decreased with the increase of MDF thickness .When thickness is 16 mm , the proper hot-press temperature was 190 ℃and hot-press time was 25 smm-1 the products would be satisfied .[ Ch , 4 fig .1 tab .7 ref .]

Effects of production factors on formaldehyde emission of E₁ humid resistant medium density fiberboard

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Related

Proportional views

Effects of production factors on formaldehyde emission of E₁ humid resistant medium density fiberboard

1. School of Engineering , Zhejiang Forestry College , Lin'an 311300, Zhejiang , China;

2. Forest Station of Kaihua County , Kaihua 324300 , Zhejiang , China;

3. Forest Enterpries of Pingyang County , Pingyang 325400 , Zhejiang , China

HTML

Catalog

Effects of production factors on formaldehyde emission of E1 humid resistant medium density fiberboard

Abstract

Relative Article

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Related

Proportional views

Effects of production factors on formaldehyde emission of E1 humid resistant medium density fiberboard

1. School of Engineering , Zhejiang Forestry College , Lin'an 311300, Zhejiang , China; 2. Forest Station of Kaihua County , Kaihua 324300 , Zhejiang , China; 3. Forest Enterpries of Pingyang County , Pingyang 325400 , Zhejiang , China

HTML

Catalog

Export File

Citation

Format

Content

Effects of production factors on formaldehyde emission of E₁ humid resistant medium density fiberboard

Effects of production factors on formaldehyde emission of E₁ humid resistant medium density fiberboard

1. School of Engineering , Zhejiang Forestry College , Lin'an 311300, Zhejiang , China;

2. Forest Station of Kaihua County , Kaihua 324300 , Zhejiang , China;

3. Forest Enterpries of Pingyang County , Pingyang 325400 , Zhejiang , China