Combustion properties and bonding strength of plywood with a styrene-acrylic-SiO2 type adhesive

LIU Duo; HE Lihui; JIANG Nianchun; BAO Binfu; SHEN Zhehong; CHEN Hao

doi:10.11833/j.issn.2095-0756.2016.01.016

Volume 33 Issue 1

Jan. 2016

Turn off MathJax

Article Contents

Article Navigation > Journal of Zhejiang A&F University > 2016 > 33(1): 116-121

LIU Duo, HE Lihui, JIANG Nianchun, BAO Binfu, SHEN Zhehong, CHEN Hao. Combustion properties and bonding strength of plywood with a styrene-acrylic-SiO2 type adhesive[J]. Journal of Zhejiang A&F University, 2016, 33(1): 116-121. doi: 10.11833/j.issn.2095-0756.2016.01.016

Citation:

LIU Duo, HE Lihui, JIANG Nianchun, BAO Binfu, SHEN Zhehong, CHEN Hao. Combustion properties and bonding strength of plywood with a styrene-acrylic-SiO2 type adhesive[J]. Journal of Zhejiang A&F University, 2016, 33(1): 116-121. doi: 10.11833/j.issn.2095-0756.2016.01.016

Combustion properties and bonding strength of plywood with a styrene-acrylic-SiO2 type adhesive

doi: 10.11833/j.issn.2095-0756.2016.01.016

1.
School of Engineering, Zhejiang A & F University, Lin’an 311300, Zhejiang, China;
2.
Zhejiang Furniture and Hardware Research Institute, Hangzhou 311100, Zhejiang, China;
3.
Forest Enterprise of Kaihua County, Kaihua 324300, Zhejiang, China

Funds:

国家林业公益性行业科研专项（201404503）;国家自然科学基金资助项目（51403190）;浙江省自然科学基金资助项目（LQ14E030011，LY15E020011）;浙江农林大学生物质资源化利用研究中心预研子项目（2013SWZ01-2）;浙江农林大学人才启动基金资助项目（2011FR041，2013FR066）

Received Date: 2015-03-18
Rev Recd Date: 2015-04-28
Publish Date: 2016-02-20

Abstract

To determine how different particle sizes and additions of styrene-acrylic-SiO2 influenced the bonding strength and combustion properties of plywood, a novel urea-formaldehyde （UF） resin adhesive was modified through physical blending with styrene-acrylic-SiO2, and flame retardant and bond strength test were carried out. Results showed that a particle size of 60 mesh and a 15% addition of styrene-acrylic-SiO2 had a strong effect on bonding strength and combustion properties of plywood. With these conditions, plywood had the best performance when bonding strength was 1.33 MPa, total heat release was 16.3 MJm-2, and total smoke release was 149.80 m2m－2. ［Ch, 4 fig. 4 tab. 8 ref.］
- wood science and technology,
- urea-formaldehyde resin adhesive,
- styrene-acrylic-SiO2 modifier,
- plywood,
- bonding strength,
- combustion property

Relative Article

[1]	BAO Minzhen, YU Wenji, CHEN Yuhe, YU Yanglun, WU Zaixing, HE Sheng, LI Neng. Effects of CuAz preservative on the antiseptic performance and physical and mechanical properties of poplar scrimber . Journal of Zhejiang A&F University, 2020, 37(1): 165-170. doi: 10.11833/j.issn.2095-0756.2020.01.022
[2]	XUE Ziqiao, WANG Xuehua, ZHOU Yaqin, CHEN Mengqi, HUANG Qiongtao. Physical and mechanical properties of low thermo-vacuum treated wood . Journal of Zhejiang A&F University, 2019, 36(1): 177-182. doi: 10.11833/j.issn.2095-0756.2019.01.022
[3]	HUANG Chengjian, BAO Yongjie, LI Neng, XIAO Ruichong, WU Zaixing, CHEN Yuhe. Adhesives used to make bamboo/wood composite electro-thermal plywood . Journal of Zhejiang A&F University, 2017, 34(2): 369-373. doi: 10.11833/j.issn.2095-0756.2017.02.023
[4]	WU Zhigang, LEI Hong, DU Guanben, WANG Hui, XI Xuedong, CAO Ming, SHEN Gaoli, XIONG Wen. Particle board with soy protein-based adhesives . Journal of Zhejiang A&F University, 2016, 33(1): 172-176. doi: 10.11833/j.issn.2095-0756.2016.01.023
[5]	LIU Binbin, SUN Fangli, ZHANG Shaoyong, ZHOU Yueying, GU Yuanyuan. Heat with propiconazole to treat bamboo mold fungi . Journal of Zhejiang A&F University, 2015, 32(5): 783-788. doi: 10.11833/j.issn.2095-0756.2015.05.019
[6]	ZHANG Weigang, BAO Binfu, DU Chungui, ZHANG Hong. Combustion properties of Chinese fir densified by phenolic resin impregnation and compression . Journal of Zhejiang A&F University, 2015, 32(3): 399-403. doi: 10.11833/j.issn.2095-0756.2015.03.010
[7]	ZHANG Lei, CHANG Xiaoya, WU Jing, WANG Mingzhi. Fire-retardant properties of an intumescent fire retardant coating for wood using 4A zeolite . Journal of Zhejiang A&F University, 2015, 32(1): 156-161. doi: 10.11833/j.issn.2095-0756.2015.01.023
[8]	GONG Yingchun, REN Haiqing, TANG Zhengjie, WU Zhangkang, HUANG Wei. Effect of three flame retardants on the performance of PE wood plastic composites flooring . Journal of Zhejiang A&F University, 2015, 32(3): 410-414. doi: 10.11833/j.issn.2095-0756.2015.03.012
[9]	WANG Shuqiang, PANG Xiaoren, HUANG Chengjian, SHEN Daohai, ZHANG Weigang, LI Yanjun. Combustion properties of sliced bamboo plywood with chemical loading . Journal of Zhejiang A&F University, 2015, 32(4): 590-595. doi: 10.11833/j.issn.2095-0756.2015.04.015
[10]	WANG Congcong, QIAN Jun. Quality of pieces for bamboo curtain plywood using M_OR and M_OE . Journal of Zhejiang A&F University, 2014, 31(5): 758-763. doi: 10.11833/j.issn.2095-0756.2014.05.015
[11]	ZHU Hangrui, ZHUANG Xiaowei, PAN Xin, CHEN Shunwei, ZHANG Jiangli. Combustion performance of charcoal briquettes made from three kinds of epicarps . Journal of Zhejiang A&F University, 2013, 30(1): 90-94. doi: 10.11833/j.issn.2095-0756.2013.01.013
[12]	LI Xiaoping, WU Zhangkang, WANG Jun. Manufacture and properties of Pinus kesiya flame retardant plywood . Journal of Zhejiang A&F University, 2013, 30(5): 724-728. doi: 10.11833/j.issn.2095-0756.2013.05.014
[13]	FU Yun-lin, MO Yin-you, QING Guan-li, ZHAO Lin, RONG Yu-quan. Liquefaction of Eucalyptus bark and resinification of liquefied products . Journal of Zhejiang A&F University, 2011, 28(3): 466-471. doi: 10.11833/j.issn.2095-0756.2011.03.019
[14]	LIU Bo, YU Shu-quan, ZHOU Guo-mo, ZHENG Wen-da, LIU Xue-song, LU Feng-zhu, HUANG Zhi-wei, ZHANG Zi-yan. Combustibility of Schima superba leaves using a cone calorimeter . Journal of Zhejiang A&F University, 2008, 25(1): 69-71.
[15]	HUANG He-lang, LU Xiao-ning, XUE Li-dan, ZENG Zhi-gao, LIANG Xing-yu. Bonding performance of bamboo plywood improved by O2 plasma treatment . Journal of Zhejiang A&F University, 2006, 23(5): 486-490.
[16]	LU Feng-zhu, XU Yue-biao, QIAN Jun, XU Qun-fang, YAN Jian-min. Combustion properties of Phyllostachys pubescens wood at different ages . Journal of Zhejiang A&F University, 2005, 22(2): 198-202.
[17]	FU Shen-yuan, LU Jian-quan, YU Hong-wei, HUAI Min. Synthesis of copolymer acrylates-vinyl emulsion and wood cold pressing adhesive . Journal of Zhejiang A&F University, 2002, 19(1): 12-16.
[18]	FU Sheng-yuan, YU Hong-wei, HUAI Min, LU Jian-quan. Preparation of compound starch adhesive and it's application in plywood . Journal of Zhejiang A&F University, 2002, 19(3): 269-272.
[19]	ZHANG Wen-biao, LU Xiao-bao, LIU Xian-yi, ZHOU Wei-qing, YU Xiao-hong. Status and countermeasures on fire retardant plywood . Journal of Zhejiang A&F University, 2000, 17(2): 208-214.
[20]	QIAN Jun, JIN Yong-ming, ZHANG Wen-biao. A further study on effects of electric field on poplar wood-bonding . Journal of Zhejiang A&F University, 1999, 16(3): 293-296.

References
Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article views(2303) PDF downloads(584) Cited by()

Proportional views

Combustion properties and bonding strength of plywood with a styrene-acrylic-SiO2 type adhesive

1. School of Engineering, Zhejiang A & F University, Lin’an 311300, Zhejiang, China;

2. Zhejiang Furniture and Hardware Research Institute, Hangzhou 311100, Zhejiang, China;

3. Forest Enterprise of Kaihua County, Kaihua 324300, Zhejiang, China

Funds:

Received Date: 2015-03-18

Rev Recd Date: 2015-04-28

Publish Date: 2016-02-20

Key words:

Abstract: To determine how different particle sizes and additions of styrene-acrylic-SiO2 influenced the bonding strength and combustion properties of plywood, a novel urea-formaldehyde （UF） resin adhesive was modified through physical blending with styrene-acrylic-SiO2, and flame retardant and bond strength test were carried out. Results showed that a particle size of 60 mesh and a 15% addition of styrene-acrylic-SiO2 had a strong effect on bonding strength and combustion properties of plywood. With these conditions, plywood had the best performance when bonding strength was 1.33 MPa, total heat release was 16.3 MJm-2, and total smoke release was 149.80 m2m－2. ［Ch, 4 fig. 4 tab. 8 ref.］

Combustion properties and bonding strength of plywood with a styrene-acrylic-SiO2 type adhesive

doi: 10.11833/j.issn.2095-0756.2016.01.016

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Related

Proportional views