蓖麻秆显微构造和纤维形态的研究

李晓平; 周定国; 周绪斌; 王伟; 邵颐

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

蓖麻秆显微构造和纤维形态的研究

李晓平 , 周定国 , 周绪斌 , 王伟 , 邵颐

文章导航 > 浙江农林大学学报 > 2009 > 26(2): 239-245

李晓平, 周定国, 周绪斌, 王伟, 邵颐. 蓖麻秆显微构造和纤维形态的研究[J]. 浙江农林大学学报, 2009, 26(2): 239-245.

引用本文:

李晓平, 周定国, 周绪斌, 王伟, 邵颐. 蓖麻秆显微构造和纤维形态的研究[J]. 浙江农林大学学报, 2009, 26(2): 239-245.

LI Xiao-ping, ZHOU Ding-guo, ZHOU Xu-bin, WANG Wei, SHAO Yi. Microstructure and fiber size of the castor-oil plant[J]. Journal of Zhejiang A&F University, 2009, 26(2): 239-245.

Citation:

LI Xiao-ping, ZHOU Ding-guo, ZHOU Xu-bin, WANG Wei, SHAO Yi. Microstructure and fiber size of the castor-oil plant[J]. Journal of Zhejiang A&F University, 2009, 26(2): 239-245.

蓖麻秆显微构造和纤维形态的研究

1.
南京林业大学木材工业学院，江苏南京 210037

详细信息

通信作者: 李晓平

Microstructure and fiber size of the castor-oil plant

1.
College of Wood Industry，Nanjing Forestry University，Nanjing 210037，Jiangsu，China

More Information

Corresponding author: LI Xiao-ping

摘要: 蓖麻Ricinus communis秆是一种优质的纤维原料。为了更好地研究和利用蓖麻秆，采用扫描电子显微镜和光学显微镜研究了蓖麻秆皮部、木质部和髓部的显微结构；并利用Motic Images Plus 2.0 图像处理系统测量了蓖麻秆皮部和木质部的纤维尺寸。结果表明，蓖麻秆皮部含有纤维细胞、轴向薄壁细胞和射线细胞；木质部的结构类似于散孔材，靠近髓的部位管孔较发达，具有单列或双列的异型木射线，纤维细胞壁上可见具缘纹孔，节部纤维弯曲；髓部多为多面体的薄壁细胞，可观察到螺纹导管。皮部纤维长度最大可达26.50 mm，长宽比高达540.00，壁腔比0.56～0.83；枝丫部分的纤维最长，长宽比最大；穗部的纤维最短，长宽比和壁腔比最小。木质部纤维的平均长度为0.75～0.90 mm，宽度4.38～5.40 μm，长宽比31.78～37.54，壁腔比0.56～0.83。蓖麻秆纵向上枝丫部分的平均长度、腔宽和长宽比小于秆部，壁腔比大于或等于秆部；穗部纤维的长度、宽度和腔宽均最小，长宽比和壁腔比最大。径向上靠近木质部中部的细胞长度、细胞腔宽度和长宽比较大；最外侧细胞的宽度、壁厚和壁腔比最大。蓖麻秆是一种优质的纤维原料，可用来造纸和制造人造板等工业化利用；其不同部位的纤维形态不同，呈一定的规律变化。图9表3参10
- 材料学 /
- 蓖麻秆 /
- 显微结构 /
- 细胞种类 /
- 纤维形态
Abstract: To better use the castor-oil plant as a high quality fiber-material，the microstructure and fiber size of the cortex，xylem，and marrow of the castor-oil plant was studied with a Scanning Electron Microscope （SEM），Optics Microscope，and Motic Images Plus 2.0 image processing software system. Results showed the presence of fibers，axis-thin-wall，and radial cells in the cortex of the plant. The xylem microstructure was similar to diffuse-porous wood with the pipe orifice developed close up marrow and having linear-heterotype and non-linear-heterotype rays. Border pits were found on the fiber cell which curved in a plant burl. There also were polyhedral-shin wall cells and spiral vessels in the plant marrow. The cortex fiber cell was most to 26.50 mm in length，high to 540.00 in ratio of length to width and had a cell wall：cell cavity in width of 0.56∶0.83. The fiber cell of the plant’s branch-cortex was longest in length and largest in length to width ratio. The plant’s fiber cell of spike-cortex was shortest in length，smallest in length to width ratio and wall to cavity in width. The xylem fiber cell was from 0.75 to 0.90 mm in length，from 4.38 to 5.40 μm in width，and had a length to width cell ratio of 31.78∶37.54. The cell wall∶cell cavity in width was from 0.56 to 0.83. For the axes，the average length and width of the cell cavity and the length：width of the branch fiber cell was smaller than those of the trunk fiber cell，but the cell wall to cell cavity ratio for the width of the branch fiber cell was greater than or equal to those of the trunk fiber cell. In the spike the length，cell width，and cell cavity width of the fiber cell was smallest，but the cell length∶width and the width of the cell wall ∶ cell cavity was largest. In middle part of the xylem the radial length，cell cavity width，and the length∶width ratio of the fiber cell was larger，and the cell width，cell wall width，and cell wall ∶ cell cavity in width of the fiber cell in outside were largest. Thus，the fiber size was different in the different parts of the castor-oil plant. Since this fiber is an excellent material，it can be used to make paper or make artificial boards. ［Ch，9 fig. 3 tab. 10 ref.］
- material science /
- castor-oil plant /
- microstructure /
- cell type /
- fiber size

[1]	靳皓然, 杨善为, 袁蕾慧子, 潘倩, 侯思璐, 范晓明, 袁德义. 油茶未授粉胚珠愈伤组织诱导及形态学和细胞学特征 . 浙江农林大学学报, 2023, 40(4): 773-782. doi: 10.11833/j.issn.2095-0756.20220507
[2]	牛思杰, 王娜, 崔百祥, 王传贵, 武恒, 张双燕. 不同竹龄和部位对毛竹纤维形态及结晶度的影响 . 浙江农林大学学报, 2023, 40(2): 446-452. doi: 10.11833/j.issn.2095-0756.20220749
[3]	李荣荣, 贺楚君, 彭博, 王传贵. 毛竹材不同部位纤维形态及部分物理性能差异 . 浙江农林大学学报, 2021, 38(4): 854-860. doi: 10.11833/j.issn.2095-0756.20200649
[4]	李冬林, 金雅琴, 崔梦凡, 黄琳曦, 裴文慧. 夏季遮光对连香树幼苗形态、光合作用及叶肉细胞超微结构的影响 . 浙江农林大学学报, 2020, 37(3): 496-505. doi: 10.11833/j.issn.2095-0756.20190370
[5]	李聪聪, 潘彪, 王慧, 黄利斌. 引种美国红橡的纤维形态、微纤丝角及结晶度 . 浙江农林大学学报, 2020, 37(1): 158-164. doi: 10.11833/j.issn.2095-0756.2020.01.021
[6]	查瑶, 饶俊, 关莹, 张利萍, 高慧. 竹叶/HDPE复合材料的制备及性能 . 浙江农林大学学报, 2020, 37(2): 343-349. doi: 10.11833/j.issn.2095-0756.2020.02.020
[7]	尹焕焕, 刘青华, 周志春, 万雪琴, 余启新, 丰忠平. 马尾松无性系木材基本密度和纤维形态的变异及选择 . 浙江农林大学学报, 2020, 37(6): 1186-1192. doi: 10.11833/j.issn.2095-0756.20190720
[8]	李媛媛, 张双燕, 王传贵, 方徐勤. 毛竹采伐剩余物的化学成分、纤维形态及纸浆性能 . 浙江农林大学学报, 2019, 36(2): 219-226. doi: 10.11833/j.issn.2095-0756.2019.02.002
[9]	柴晓娟, 苏燕, 陈慧, 郭玮龙, 金水虎. 蔺草底部茎秆解剖构造与力学性能 . 浙江农林大学学报, 2016, 33(6): 1058-1066. doi: 10.11833/j.issn.2095-0756.2016.06.019
[10]	许秀玉, 王明怀, 仲崇禄, 张华新. 不同树种木材性质及其抗台风性能 . 浙江农林大学学报, 2014, 31(5): 751-757. doi: 10.11833/j.issn.2095-0756.2014.05.014
[11]	杨学通, 郭文静, 陈巧花, 王正. 造纸剩余物制备复合板材可行性研究 . 浙江农林大学学报, 2014, 31(6): 954-958. doi: 10.11833/j.issn.2095-0756.2014.06.019
[12]	刘晓玲, 符韵林. 人工林观光木主要解剖特性及基本密度研究 . 浙江农林大学学报, 2013, 30(5): 769-776. doi: 10.11833/j.issn.2095-0756.2013.05.021
[13]	李晓平, 吴章康, 张聪杰. 烟秆纤维部分物理性能在纵向上的变异特性 . 浙江农林大学学报, 2013, 30(4): 548-551. doi: 10.11833/j.issn.2095-0756.2013.04.014
[14]	魏兆兆, 谢云, 孟辉, 关玉梅, 吴窈窈. 3种类型浙江红山茶的花粉形态学研究 . 浙江农林大学学报, 2012, 29(4): 634-638. doi: 10.11833/j.issn.2095-0756.2012.04.024
[15]	符韵林, 莫引优, 刘一星, 乔梦吉, 陈文军. 纳米二氧化硅在涂料中的应用及其增强木材表面特性的构想 . 浙江农林大学学报, 2011, 28(4): 644-652. doi: 10.11833/j.issn.2095-0756.2011.04.020
[16]	苏文会, 范少辉, 彭颖, 俞友明, 张大鹏. 车筒竹、箣竹和越南巨竹竹材的纤维形态与组织比量 . 浙江农林大学学报, 2011, 28(3): 386-390. doi: 10.11833/j.issn.2095-0756.2011.03.007
[17]	李晓平, 周定国, 徐凯宏. 蓖麻秆不同部位的特性及其对蓖麻秆刨花板性能的影响 . 浙江农林大学学报, 2010, 27(3): 424-429. doi: 10.11833/j.issn.2095-0756.2010.03.017
[18]	王曙光, 普晓兰, 丁雨龙, 万贤崇, 林树燕. 云南箭竹纤维形态变异规律 . 浙江农林大学学报, 2009, 26(4): 528-532.
[19]	余学军, 韩红, 田荆祥, 王仁东, 周迎春. 浙江省速生杉木纤维形态及基本密度* . 浙江农林大学学报, 1997, 14(3): 220-224.
[20]	谷澍芳. 檫树营养器官解剖构造与其生物学特性相关性的探讨 . 浙江农林大学学报, 1993, 10(1): 1-6.

链接本文:
https://zlxb.zafu.edu.cn/article/id/389

https://zlxb.zafu.edu.cn/article/zjnldxxb/2009/2/239

点击查看大图

计量

文章访问数: 5574
HTML全文浏览量: 183
PDF下载量: 234
被引次数: 0

蓖麻秆显微构造和纤维形态的研究

1. 南京林业大学木材工业学院，江苏南京 210037

通信作者: 李晓平

刊出日期: 2009-04-20

关键词:

摘要: 蓖麻Ricinus communis秆是一种优质的纤维原料。为了更好地研究和利用蓖麻秆，采用扫描电子显微镜和光学显微镜研究了蓖麻秆皮部、木质部和髓部的显微结构；并利用Motic Images Plus 2.0 图像处理系统测量了蓖麻秆皮部和木质部的纤维尺寸。结果表明，蓖麻秆皮部含有纤维细胞、轴向薄壁细胞和射线细胞；木质部的结构类似于散孔材，靠近髓的部位管孔较发达，具有单列或双列的异型木射线，纤维细胞壁上可见具缘纹孔，节部纤维弯曲；髓部多为多面体的薄壁细胞，可观察到螺纹导管。皮部纤维长度最大可达26.50 mm，长宽比高达540.00，壁腔比0.56～0.83；枝丫部分的纤维最长，长宽比最大；穗部的纤维最短，长宽比和壁腔比最小。木质部纤维的平均长度为0.75～0.90 mm，宽度4.38～5.40 μm，长宽比31.78～37.54，壁腔比0.56～0.83。蓖麻秆纵向上枝丫部分的平均长度、腔宽和长宽比小于秆部，壁腔比大于或等于秆部；穗部纤维的长度、宽度和腔宽均最小，长宽比和壁腔比最大。径向上靠近木质部中部的细胞长度、细胞腔宽度和长宽比较大；最外侧细胞的宽度、壁厚和壁腔比最大。蓖麻秆是一种优质的纤维原料，可用来造纸和制造人造板等工业化利用；其不同部位的纤维形态不同，呈一定的规律变化。图9表3参10

English Abstract

Microstructure and fiber size of the castor-oil plant

1. College of Wood Industry，Nanjing Forestry University，Nanjing 210037，Jiangsu，China

Corresponding author: LI Xiao-ping

Publish Date: 2009-04-20

Keywords:

Abstract: To better use the castor-oil plant as a high quality fiber-material，the microstructure and fiber size of the cortex，xylem，and marrow of the castor-oil plant was studied with a Scanning Electron Microscope （SEM），Optics Microscope，and Motic Images Plus 2.0 image processing software system. Results showed the presence of fibers，axis-thin-wall，and radial cells in the cortex of the plant. The xylem microstructure was similar to diffuse-porous wood with the pipe orifice developed close up marrow and having linear-heterotype and non-linear-heterotype rays. Border pits were found on the fiber cell which curved in a plant burl. There also were polyhedral-shin wall cells and spiral vessels in the plant marrow. The cortex fiber cell was most to 26.50 mm in length，high to 540.00 in ratio of length to width and had a cell wall：cell cavity in width of 0.56∶0.83. The fiber cell of the plant’s branch-cortex was longest in length and largest in length to width ratio. The plant’s fiber cell of spike-cortex was shortest in length，smallest in length to width ratio and wall to cavity in width. The xylem fiber cell was from 0.75 to 0.90 mm in length，from 4.38 to 5.40 μm in width，and had a length to width cell ratio of 31.78∶37.54. The cell wall∶cell cavity in width was from 0.56 to 0.83. For the axes，the average length and width of the cell cavity and the length：width of the branch fiber cell was smaller than those of the trunk fiber cell，but the cell wall to cell cavity ratio for the width of the branch fiber cell was greater than or equal to those of the trunk fiber cell. In the spike the length，cell width，and cell cavity width of the fiber cell was smallest，but the cell length∶width and the width of the cell wall ∶ cell cavity was largest. In middle part of the xylem the radial length，cell cavity width，and the length∶width ratio of the fiber cell was larger，and the cell width，cell wall width，and cell wall ∶ cell cavity in width of the fiber cell in outside were largest. Thus，the fiber size was different in the different parts of the castor-oil plant. Since this fiber is an excellent material，it can be used to make paper or make artificial boards. ［Ch，9 fig. 3 tab. 10 ref.］

李晓平, 周定国, 周绪斌, 王伟, 邵颐. 蓖麻秆显微构造和纤维形态的研究[J]. 浙江农林大学学报, 2009, 26(2): 239-245.

引用本文:

李晓平, 周定国, 周绪斌, 王伟, 邵颐. 蓖麻秆显微构造和纤维形态的研究[J]. 浙江农林大学学报, 2009, 26(2): 239-245.

LI Xiao-ping, ZHOU Ding-guo, ZHOU Xu-bin, WANG Wei, SHAO Yi. Microstructure and fiber size of the castor-oil plant[J]. Journal of Zhejiang A&F University, 2009, 26(2): 239-245.

Citation:

LI Xiao-ping, ZHOU Ding-guo, ZHOU Xu-bin, WANG Wei, SHAO Yi. Microstructure and fiber size of the castor-oil plant[J]. Journal of Zhejiang A&F University, 2009, 26(2): 239-245.