Plant protein based adhesive for particleboard

LI Guangrong; GU Zhongchun; LI Junzhang; DU Yeyun

doi:10.11833/j.issn.2095-0756.2015.06.013

Volume 32 Issue 6

Nov. 2015

Turn off MathJax

Article Contents

Article Navigation > Journal of Zhejiang A&F University > 2015 > 32(6): 909-913

LI Guangrong, GU Zhongchun, LI Junzhang, DU Yeyun. Plant protein based adhesive for particleboard[J]. Journal of Zhejiang A&F University, 2015, 32(6): 909-913. doi: 10.11833/j.issn.2095-0756.2015.06.013

Citation:

LI Guangrong, GU Zhongchun, LI Junzhang, DU Yeyun. Plant protein based adhesive for particleboard[J]. Journal of Zhejiang A&F University, 2015, 32(6): 909-913. doi: 10.11833/j.issn.2095-0756.2015.06.013

Plant protein based adhesive for particleboard

doi: 10.11833/j.issn.2095-0756.2015.06.013

1.
Hubei Academy of Forestry, Wuhan 430075, Hubei, China

Funds:

湖北省林业科学研究院青年基金资助项目（2014YQNJJ03）

Received Date: 2015-01-12
Rev Recd Date: 2015-03-05
Publish Date: 2015-12-20

Abstract

To prepare a plant protein-based, biomass adhesive particleboard for interior fixtures （including furniture） to be used in dry conditions. Through the single factor test, the way and the parameters of the adhesive stired were studied, and the influence of the hot press time, press temperature and pressure on the physical and mechanical properties of the particleboard was studied by orthogonal test. Results indicated that the horizontal mixer design was used to stir the adhesive at 200 rmin－1 for 5－8 min, hot process parameters: 6 min press time, 180 ℃ temperature, and 2.550 MPa pressure. Appearance quality and properties of particleboard met the requirements for GB/T 4897.1－2003 and GB/T 4897.3－2003 standards. Properties of the particleboard: density 0.74 gcm－3, static bending intensity 16.8 MPa, internal bond strength 0.49 MPa, surface bonding strength 1.01 MPa, 2 h absorbing water thickness expansion rate 1.8%, free formaldehyde emission 14.0 mgkg－1. Additionally, the free formaldehyde emission of the particleboard contained in wood shavings. Thus, it would be feasible to prepare this new particleboard using this technology. ［Ch, 5 tab. 8 ref.］
- wood science and technology,
- plant protein based adhesive,
- particleboard,
- hot process parameters,
- free

Relative Article

[1]	CHEN Chaoyi, LI Wanzhao, MEI Changtong, HUANG Helang. Effect of water on the mechanical performance of OSB in compression tests . Journal of Zhejiang A&F University, 2022, 39(2): 415-422. doi: 10.11833/j.issn.2095-0756.20210291
[2]	FENG Chen, TONG Hongtuo, WANG Haoqing, LIU Changjie, QIAN Jun. Surface coating technology for medium density fiberboard . Journal of Zhejiang A&F University, 2017, 34(5): 915-920. doi: 10.11833/j.issn.2095-0756.2017.05.019
[3]	WU Zhigang, LEI Hong, DU Guanben, WANG Hui, XI Xuedong, CAO Ming, SHEN Gaoli, XIONG Wen. Particle board with soy protein-based adhesives . Journal of Zhejiang A&F University, 2016, 33(1): 172-176. doi: 10.11833/j.issn.2095-0756.2016.01.023
[4]	ZHOU Ju, TONG Hongtuo, WANG Congcong, HUANG Yanwen, MAO Xinglai, QIAN Jun. Process scheme of flat-pressure with hollow particleboard . Journal of Zhejiang A&F University, 2015, 32(5): 770-775. doi: 10.11833/j.issn.2095-0756.2015.05.017
[5]	LI Huiyuan, ZHOU Dingguo, WU Qinglin. Properties of wood plastic composite with different photo-stabilizer and/or zinc borate . Journal of Zhejiang A&F University, 2015, 32(6): 914-918. doi: 10.11833/j.issn.2095-0756.2015.06.014
[6]	LI Xiaoping, WU Zhangkang, ZOU Quan, ZHANG Qingwei. Flammability of particleboard paneling using resins and fire retardants . Journal of Zhejiang A&F University, 2014, 31(5): 739-744. doi: 10.11833/j.issn.2095-0756.2014.05.012
[7]	WANG Xinzhou, DENG Yuhe, LIAO Chengbin, CHEN Chen, WANG Ningsheng, WU Jing, HOU Tianyu. Characteristics of reed stem epidermis and effects of waterproofing agent on reed particleboard . Journal of Zhejiang A&F University, 2013, 30(2): 245-250. doi: 10.11833/j.issn.2095-0756.2013.02.014
[8]	YAN Hai-cheng, ZHANG Hou-jiang, ZHU Lei, SUN Yan-liang, LIU Xiang-xi. Dynamic and static modulus measurements for thin particleboard . Journal of Zhejiang A&F University, 2012, 29(1): 83-87. doi: 10.11833/j.issn.2095-0756.2012.01.015
[9]	YANG Le, BAO Bin-fu, SUN Fang-li, CHEN An-liang, WANG Pin-wei, DU Chun-gui, YU Hong-wei. Mould-resistance of two new preservatives on particleboard . Journal of Zhejiang A&F University, 2011, 28(1): 7-12. doi: 10.11833/j.issn.2095-0756.2011.01.002
[10]	LI Xiao-ping, ZHOU Ding-gou, XU Kai-hong. Feasibility of castor stalks for particle boards . Journal of Zhejiang A&F University, 2010, 27(3): 424-429. doi: 10.11833/j.issn.2095-0756.2010.03.017
[11]	MA Ling-fei, JI Wei-bing. Simple method for producing strand used in laboratory . Journal of Zhejiang A&F University, 2007, 24(1): 96-99.
[12]	SUN Zhao-bin, CHEN Tai-an, DENG Qi-ping. Hot pressing technology for Dendrocalamus giganteus bamboo wood . Journal of Zhejiang A&F University, 2006, 23(4): 424-428.
[13]	BAO Bin-fu, SHA Cun-long, YU Wen-jun, JIANG Zhi-hong, YU You-ming, YU Xue-jun. Effects of final treatment techniques on the properties of fast curing cement particle board . Journal of Zhejiang A&F University, 2006, 23(3): 237-241.
[14]	BAO Bin-fu, YU Wen-jun, JIANG Zhi-hong, YU You-ming. Effect of hot-pressing temperature and natural curing time on properties of fast-curing cement particle board . Journal of Zhejiang A&F University, 2006, 23(2): 129-134.
[15]	SHEN Zhe-hong, JIANG Nian-chun, CHEN Li, LI Wen-zhu, YU You-ming. Effects of production factors on formaldehyde emission of E₁ humid resistant medium density fiberboard . Journal of Zhejiang A&F University, 2005, 22(2): 203-206.
[16]	JIN Yong-ming, YU You-ming, YE Liang-ming. Effects of wood shaving shapes on the properties of quick-curing cement particle board . Journal of Zhejiang A&F University, 2003, 20(3): 236-239.
[17]	JIN Yong-ming, BAO Bing-fu, CHEN Qing-hu, YU Xue-jun, YU You-ming, YE Liang-ming. Effects of assembly time and cement/wood ratio on properties of . Journal of Zhejiang A&F University, 2003, 20(3): 232-235.
[18]	SHEN Zhe-hong, FANG Qun, QIAN Jun. Technology of bond joint Chinese fir-core blockboard . Journal of Zhejiang A&F University, 2002, 19(2): 208-210.
[19]	YE Liang-ming, JIN Yong-ming, FU Shen-Yuan, LI Yan-jun. Selection of chemical additives with function of fast curing for cement particle board . Journal of Zhejiang A&F University, 2002, 19(1): 5-8.
[20]	YE Liang-ming, JIANG Zhi-hong, BAO Bing-fu, YU Xue-jun, YU You-ming. Hot pressing technology of fast-curing for cement particle board . Journal of Zhejiang A&F University, 2002, 19(2): 118-121.

References
Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article views(1851) PDF downloads(455) Cited by()

Proportional views

Plant protein based adhesive for particleboard

1. Hubei Academy of Forestry, Wuhan 430075, Hubei, China

Funds:

湖北省林业科学研究院青年基金资助项目（2014YQNJJ03）

Received Date: 2015-01-12

Rev Recd Date: 2015-03-05

Publish Date: 2015-12-20

Key words:

Abstract: To prepare a plant protein-based, biomass adhesive particleboard for interior fixtures （including furniture） to be used in dry conditions. Through the single factor test, the way and the parameters of the adhesive stired were studied, and the influence of the hot press time, press temperature and pressure on the physical and mechanical properties of the particleboard was studied by orthogonal test. Results indicated that the horizontal mixer design was used to stir the adhesive at 200 rmin－1 for 5－8 min, hot process parameters: 6 min press time, 180 ℃ temperature, and 2.550 MPa pressure. Appearance quality and properties of particleboard met the requirements for GB/T 4897.1－2003 and GB/T 4897.3－2003 standards. Properties of the particleboard: density 0.74 gcm－3, static bending intensity 16.8 MPa, internal bond strength 0.49 MPa, surface bonding strength 1.01 MPa, 2 h absorbing water thickness expansion rate 1.8%, free formaldehyde emission 14.0 mgkg－1. Additionally, the free formaldehyde emission of the particleboard contained in wood shavings. Thus, it would be feasible to prepare this new particleboard using this technology. ［Ch, 5 tab. 8 ref.］

Plant protein based adhesive for particleboard

doi: 10.11833/j.issn.2095-0756.2015.06.013

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Related

Proportional views