Hardware and software development for a wood drying kiln system

ZENG Song-wei; LIU Jin-biao; ZHOU Qiao-di; XIA Xia

Volume 23 Issue 6

Feb. 2017

Turn off MathJax

Article Contents

Article Navigation > Journal of Zhejiang A&F University > 2006 > 23(6): 673-677

ZENG Song-wei, LIU Jin-biao, ZHOU Qiao-di, XIA Xia. Hardware and software development for a wood drying kiln system[J]. Journal of Zhejiang A&F University, 2006, 23(6): 673-677.

Citation:

ZENG Song-wei, LIU Jin-biao, ZHOU Qiao-di, XIA Xia. Hardware and software development for a wood drying kiln system[J]. Journal of Zhejiang A&F University, 2006, 23(6): 673-677.

Hardware and software development for a wood drying kiln system

1.
School of Electronic Information , Hangzhou Dianzi University , Hangzhou 310027, Zhejiang , China;
2.
School of Information Engineering , Zhejiang Forestry College , Lin'an 311300 , Zhejiang , China

Publish Date: 2006-12-20

Abstract

Lumber is complex , porous , moist , and viscoelastic .Moisture content in lumber varies with tree-species, tree-age , and felling season .It must be reduced to an acceptable level to guarantee the quality and service life of wood products .During lumber drying , many factors , such as temperature in the drying kiln , real-time moisture content , and circulation rate of hot air in the drying kiln , influence the final wood-product quality .So drying wood efficiently and effectively are important factors .This study used the latest theoretical achievements related to wood drying , and to propose software and hardware program designs .The hardware system was composed of a transducer unit , a signal processing unit , an MSP 430 F149 micro-controller , isolation actuation , and other periphery circuits , while the software system programs included a main program , data (temperature , equal moisture content , and moisture content of lumber)capture program, etc .[ Ch , 4 fig .1 tab .17 ref .]
- forest engineering,
- acquisition control,
- wood drying,
- MSP 430,
- equal moisture content

Relative Article

[1]	XUE Ziqiao, WANG Xuehua, ZHOU Yaqin, CHEN Mengqi, HUANG Qiongtao. Physical and mechanical properties of low thermo-vacuum treated wood . Journal of Zhejiang A&F University, 2019, 36(1): 177-182. doi: 10.11833/j.issn.2095-0756.2019.01.022
[2]	DIAO Hailin, BAI Linghai, TANG Xianming, MO Li, TANG Jixin, LUO Jianju. Pilot test drying process for Castanopsis hystrix lumber . Journal of Zhejiang A&F University, 2013, 30(2): 240-244. doi: 10.11833/j.issn.2095-0756.2013.02.013
[3]	FU Jianguo, LIU Jinliang, YANG Xiaojun, AN Yulin, LUO Jiayan. DNA extraction and molecular identification of imported Dalbergia wood . Journal of Zhejiang A&F University, 2013, 30(4): 627-632. doi: 10.11833/j.issn.2095-0756.2013.04.025
[4]	YU Le, Lü Jianxiong, LI Xianjun, XU Kang, WU Yiqiang, JIANG Jiali. Comparison of X-ray scanning and slice methods for moisture distribution measurements when drying Cunninghamia lanceolata plantation wood . Journal of Zhejiang A&F University, 2013, 30(4): 543-547. doi: 10.11833/j.issn.2095-0756.2013.04.013
[5]	ZHANG Guang-qun, WU Wei-zhi, WANG Hang-jun. A new wood microscopic image registration approach based on speeded up robust features （SURF） . Journal of Zhejiang A&F University, 2012, 29(4): 600-605. doi: 10.11833/j.issn.2095-0756.2012.04.018
[6]	FU Yun-lin, QIU Bing-fa, WEI Peng-lian, LIAO Ke-bo, LIU Xiao-ling, YUAN Zhen-shuang. Drying characteristics of Tsoongiodendron odorum wood . Journal of Zhejiang A&F University, 2011, 28(5): 767-770. doi: 10.11833/j.issn.2095-0756.2011.05.013
[7]	HAN Shu-guang, ZHOU Zhao-bing, JIANG Hua, ZHANG Yang. Enzyme pretreatments and dynamic wettability of a poplar surface . Journal of Zhejiang A&F University, 2009, 26(6): 774-777.
[8]	WANG Hang-jun, ZHANG Guang-qun, QI Heng-nian, LI Wen-zhu. A review of research on wood recognition technology . Journal of Zhejiang A&F University, 2009, 26(6): 896-902.
[9]	WEI Qi-hua, TONG Ling, CHEN Nai-rong, LIN Qiao-jia. Adhesive properties of a soy-based wood adhesive using sodium dodecyl sulfate . Journal of Zhejiang A&F University, 2008, 25(6): 772-776.
[10]	LAI Yan-xue, MA Ling-fei, CHI Shu-you, ZHANG Yi-feng, WANG Ya-hong, JIN Yong-ming. Comparing physical and mechanical properties of dead wood resulting from pine wilt disease and healthy wood . Journal of Zhejiang A&F University, 2008, 25(1): 7-10.
[11]	YANG Yan, QIU Jian. Distribution of crystals in Eucalyptus citriodora using scanning electron microscopy and energy dispersive X-ray analysis(SEM-EDXA) . Journal of Zhejiang A&F University, 2008, 25(2): 143-147.
[12]	SUI Ya-ping, SUN Fang-li, YANG Zhong-ping, WANG Shan-shan, WANG Li. Overview and prospect of termicides in wood protection . Journal of Zhejiang A&F University, 2008, 25(2): 250-254.
[13]	YIN Jian-xin, LOU Xiong-wei, HUANG Mei-li. Application of grey histogram to wood surface defects' detection . Journal of Zhejiang A&F University, 2008, 25(3): 272-276.
[14]	LI Yan-jun, ZHANG Bi-guang, ZHANG Qi-sheng, LI Xian-jun, LIU Zhi-kun. A heat and mass transfer model for high temperature drying of Chinese fir wood stick . Journal of Zhejiang A&F University, 2008, 25(2): 131-136.
[15]	LIANG Hong-wen, HUANG Heng-chuan, HUANG Cheng-biao, HUANG Hai-zhong, LIANG Xin, MENG Yue-huan. Wood physical-mechanical properties of Taiwania flousiana compared to Cunninghamia lanceolata for plantation development . Journal of Zhejiang A&F University, 2008, 25(2): 137-142.
[16]	LI Yan-jun, LI Liang, ZHANG Bi-guang. Moisture diffusion coefficient of Cunninghamia lanceolata board with non-steady state conditions . Journal of Zhejiang A&F University, 2007, 24(2): 121-124.
[17]	SUN Zhao-bin, CHEN Tai-an, DENG Qi-ping. Hot pressing technology for Dendrocalamus giganteus bamboo wood . Journal of Zhejiang A&F University, 2006, 23(4): 424-428.
[18]	LIU Zhi-jun, LI Yan-jun, ZHANG Bi-guang, LIU Zhi. Microwave drying properties of Pinus massoniana lumber . Journal of Zhejiang A&F University, 2006, 23(5): 482-485.
[19]	SHAO Qian-jun, XU Qun-fang, WANG Wei-long. Control strategies and methods of wood drying process . Journal of Zhejiang A&F University, 2003, 20(3): 307-310.
[20]	LI Yan-jun, MA Zhang-fa, ZHANG Hong, WANG Yi-bin. Preliminary study on the drying technology of Nauclea diderrichii . Journal of Zhejiang A&F University, 2001, 18(4): 384-388.

References
Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article views(1977) PDF downloads(237) Cited by()

Proportional views

Hardware and software development for a wood drying kiln system

1. School of Electronic Information , Hangzhou Dianzi University , Hangzhou 310027, Zhejiang , China;

2. School of Information Engineering , Zhejiang Forestry College , Lin'an 311300 , Zhejiang , China

Publish Date: 2006-12-20

Key words:

Abstract: Lumber is complex , porous , moist , and viscoelastic .Moisture content in lumber varies with tree-species, tree-age , and felling season .It must be reduced to an acceptable level to guarantee the quality and service life of wood products .During lumber drying , many factors , such as temperature in the drying kiln , real-time moisture content , and circulation rate of hot air in the drying kiln , influence the final wood-product quality .So drying wood efficiently and effectively are important factors .This study used the latest theoretical achievements related to wood drying , and to propose software and hardware program designs .The hardware system was composed of a transducer unit , a signal processing unit , an MSP 430 F149 micro-controller , isolation actuation , and other periphery circuits , while the software system programs included a main program , data (temperature , equal moisture content , and moisture content of lumber)capture program, etc .[ Ch , 4 fig .1 tab .17 ref .]

Hardware and software development for a wood drying kiln system

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Related

Proportional views