3种无损检测技术评估足尺规格材的静态弹性模量

江京辉; 吕建雄; 任海青; 骆秀琴; 龙超; 郭伟

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

3种无损检测技术评估足尺规格材的静态弹性模量

江京辉 , 吕建雄 , 任海青 , 骆秀琴 , 龙超 , 郭伟

文章导航 > 浙江农林大学学报 > 2008 > 25(3): 277-281

江京辉, 吕建雄, 任海青, 骆秀琴, 龙超, 郭伟. 3种无损检测技术评估足尺规格材的静态弹性模量[J]. 浙江农林大学学报, 2008, 25(3): 277-281.

引用本文:

江京辉, 吕建雄, 任海青, 骆秀琴, 龙超, 郭伟. 3种无损检测技术评估足尺规格材的静态弹性模量[J]. 浙江农林大学学报, 2008, 25(3): 277-281.

JIANG Jing-hui, Lü Jian-xiong, REN Hai-qing, LUO Xiu-qin, LONG Chao, GUO Wei. Evaluation of modulus of elasticity for dimension lumber by three nondestructive techniques[J]. Journal of Zhejiang A&F University, 2008, 25(3): 277-281.

Citation:

JIANG Jing-hui, Lü Jian-xiong, REN Hai-qing, LUO Xiu-qin, LONG Chao, GUO Wei. Evaluation of modulus of elasticity for dimension lumber by three nondestructive techniques[J]. Journal of Zhejiang A&F University, 2008, 25(3): 277-281.

3种无损检测技术评估足尺规格材的静态弹性模量

1.
中国林业科学研究院木材工业研究所国家林业局木材科学与技术重点实验室, 北京 100091

基金项目:

“十一五”国家科技支撑项目(2006BAD18B07);国家科学技术部林业工程技术标准体系构建子课题(2004DEA70900-1)

详细信息

作者简介: 江京辉,助理研究员,硕士,从事木材力学研究。E-mail:jiangjh@forestry.ac.cn。

通信作者: 吕建雄,研究员,博士生导师,从事木材科学与技术研究。E-mail:jianxiong@forestry.ac.cn

中图分类号: S781.2

Evaluation of modulus of elasticity for dimension lumber by three nondestructive techniques

1.
Key Laboratory of Wood Science and Technology of State Forestry Administration, Research Institute of Wood Industry, The Chinese Academy of Forestry, Beijing 100091, China

摘要: 首先利用横向振动、纵向基频振动和超声波3种无损检测法获得天然林樟子松Pinus sylvestris var. mongolica足尺规格材(38 mm×89 mm×4 000 mm)和人工林杉木Cunninghamia lanceolata足尺规格材(45 mm×90 mm×2 500 mm)动态弹性模量,同时根据D198-99(American Society for Testing and Materials)标准测试了其静态弹性模量;进而通过探讨动态与静态弹性模量之间的相互关系。研究结果表明,无论对哪种木材的规格材,利用上述3种无损检测方法获得动态弹性模量(Etv,Efr,Eusw)与静态弹性模量(Etru)平均值之间的关系为:Eusw > Efr > Etru > Etv;动态弹性模量与静态弹性模量之间的线性相关极显著,表明这3种无损检测方法均可以用于评估规格材的静态弹性性质;从设备的方便、可靠和易操作等方面综合考虑,利用纵向基频振动法来评估规格材的静态弹性模量,其预测效果更为理想;天然林樟子松和人工林杉木比较而言,动静态弹性模量线性相关决定系数前者大于后者,即预测天然林樟子松规格材效果更好。
- 林业工程 /
- 横向振动 /
- 纵向基频振动 /
- 超声波 /
- 弹性模量 /
- 规格材
Abstract: Dynamic bending modulus of elasticity of Mongolia scotch pine(Pinus sylvestris var. mongolica) full dimension lumber(38 mm×89 mm×4 000 mm) and Chinese fir (Cunninghamia lanceolata) plantation dimension lumber (45 mm×90 mm×2 500 mm) were tested by three non-destructive techniques, i.e. transverse vibration method, longitudinal fundamental frequency vibration method and ultrasonic wave method. At the same time, the static modulus elasticity of the above specimens were tested according to ASTM D198-99. The results showed that the value of dynamic and static modulus of elasticity followed the sequence as the following, Eusw > Efr > Etru > Etv, the relationship between dynamic and static modulus of elasticity concerning the three methods was significant at 0.01 level, indicating that all the three nondestructive methods could be used to predict the bending properties of dimension lumber. Furthermore, considering the operation of the equipment, longitudinal fundamental frequency vibration technique was the most accurate, convenient, reliable, easy and practical method. It was also found that the coefficient of determination(R2) obtained by using the three nondestructive techniques for Chinese fir plantation full dimension lumber was lower than that of Mongolia scotch pine full dimension lumber, estimating the static modulus elasticity of Mongolia scotch pine was more accurate than that of plantation Chinese fir.
- forest engineering /
- transverse vibration /
- longitudinal fundamental frequency vibration /
- ultrasonic wave /
- modulus of elasticity /
- dimension lumber

[1]	管成, 周卢婧, 张厚江, 林蔚. 用振动方式测定足尺人造板弹性模量 . 浙江农林大学学报, 2016, 33(6): 1067-1072. doi: 10.11833/j.issn.2095-0756.2016.06.020
[2]	王琮琮, 钱俊. 竹片质量对竹帘胶合板静曲强度与弹性模量的影响 . 浙江农林大学学报, 2014, 31(5): 758-763. doi: 10.11833/j.issn.2095-0756.2014.05.015
[3]	李晓平, 吴章康, 张聪杰. 烟秆纤维部分物理性能在纵向上的变异特性 . 浙江农林大学学报, 2013, 30(4): 548-551. doi: 10.11833/j.issn.2095-0756.2013.04.014
[4]	杨优优, 鲍滨福, 沈哲红. 纳米氧化锌处理马尾松材室外防霉及阻燃性能初步研究 . 浙江农林大学学报, 2012, 29(2): 197-202. doi: 10.11833/j.issn.2095-0756.2012.02.008
[5]	闫海成, 张厚江, 朱磊, 孙燕良, 刘祥熙. 薄型刨花板的动静态弹性模量检测 . 浙江农林大学学报, 2012, 29(1): 83-87. doi: 10.11833/j.issn.2095-0756.2012.01.015
[6]	王正国, 王朝晖, 段新芳, 周宇. 4类染料对棕榈藤藤材上染率的研究 . 浙江农林大学学报, 2011, 28(2): 293-298. doi: 10.11833/j.issn.2095-0756.2011.02.020
[7]	史锋厚, 朱灿灿, 沈永宝, 施季森. 超声波与渗透调节处理对油松种子萌发的影响 . 浙江农林大学学报, 2011, 28(4): 545-549. doi: 10.11833/j.issn.2095-0756.2011.04.004
[8]	梁宏温, 黄恒川, 黄承标, 黄海仲, 梁欣, 蒙跃环. 不同树龄秃杉与杉木人工林木材物理力学性质的比较 . 浙江农林大学学报, 2008, 25(2): 137-142.
[9]	来燕学, 马灵飞, 池树友, 张毅峰, 王亚红, 金永明. 松材线虫病病死木木材物理力学性质测定 . 浙江农林大学学报, 2008, 25(1): 7-10.
[10]	张叶田, 何礼平. 竹集成材与常见建筑结构材力学性能比较 . 浙江农林大学学报, 2007, 24(1): 100-104.
[11]	贺文婷, 安晓芹, 郭维明. 超声波与复合保鲜剂预处理对素心蜡梅离体小花和花枝储鲜效应的影响 . 浙江农林大学学报, 2007, 24(6): 661-665.
[12]	李开泉, 周兰姜, 张影华. 超声波与回流技术对枇杷叶中乌索酸的提取效果 . 浙江农林大学学报, 2007, 24(2): 239-241.
[13]	嵇伟兵, 姚文斌, 马灵飞. 龙竹和绿竹竹材壁厚度方向的梯度力学性能 . 浙江农林大学学报, 2007, 24(2): 125-129.
[14]	方陆明, 徐爱俊, 楼雄伟, 唐丽华. 县级林业资源管理信息系统技术标准研究与应用 . 浙江农林大学学报, 2006, 23(2): 122-128.
[15]	金春德, 张美淑, 文桂峰, 汤燕平, 徐策. 人工林赤松幼龄材与成熟材力学性质的比较 . 浙江农林大学学报, 2006, 23(5): 477-481.
[16]	王雁. 我国城市绿化理念探索的回顾与发展趋势 . 浙江农林大学学报, 2003, 20(3): 315-320.
[17]	钱俊, 俞友明, 金永明, 楼永生. 速生杉木整形工艺研究 . 浙江农林大学学报, 2002, 19(1): 9-11.
[18]	关惠元, 西野吉彦, 田中千秋. 纤维饱和点以上含水率木材纵向振动特性 . 浙江农林大学学报, 2002, 19(4): 376-381.
[19]	毕丽君. 香椿嫩叶中黄酮类化合物的提取 . 浙江农林大学学报, 2000, 17(2): 146-149.
[20]	杨云芳, 刘志坤. 毛竹材抗拉弹性模量及抗拉强度 . 浙江农林大学学报, 1996, 13(1): 21-27.

链接本文:
https://zlxb.zafu.edu.cn/article/id/2839

https://zlxb.zafu.edu.cn/article/zjnldxxb/2008/3/277

点击查看大图

计量

文章访问数: 1147
HTML全文浏览量: 210
PDF下载量: 78
被引次数: 0

3种无损检测技术评估足尺规格材的静态弹性模量

1. 中国林业科学研究院木材工业研究所国家林业局木材科学与技术重点实验室, 北京 100091

基金项目:

“十一五”国家科技支撑项目(2006BAD18B07);国家科学技术部林业工程技术标准体系构建子课题(2004DEA70900-1)

作者简介:
江京辉,助理研究员,硕士,从事木材力学研究。E-mail:jiangjh@forestry.ac.cn。

通信作者: 吕建雄,研究员,博士生导师,从事木材科学与技术研究。E-mail:jianxiong@forestry.ac.cn

收稿日期: 2007-05-10
修回日期: 2007-06-26
刊出日期: 2008-06-10

中图分类号: S781.2

关键词:

摘要: 首先利用横向振动、纵向基频振动和超声波3种无损检测法获得天然林樟子松Pinus sylvestris var. mongolica足尺规格材(38 mm×89 mm×4 000 mm)和人工林杉木Cunninghamia lanceolata足尺规格材(45 mm×90 mm×2 500 mm)动态弹性模量,同时根据D198-99(American Society for Testing and Materials)标准测试了其静态弹性模量;进而通过探讨动态与静态弹性模量之间的相互关系。研究结果表明,无论对哪种木材的规格材,利用上述3种无损检测方法获得动态弹性模量(Etv,Efr,Eusw)与静态弹性模量(Etru)平均值之间的关系为:Eusw > Efr > Etru > Etv;动态弹性模量与静态弹性模量之间的线性相关极显著,表明这3种无损检测方法均可以用于评估规格材的静态弹性性质;从设备的方便、可靠和易操作等方面综合考虑,利用纵向基频振动法来评估规格材的静态弹性模量,其预测效果更为理想;天然林樟子松和人工林杉木比较而言,动静态弹性模量线性相关决定系数前者大于后者,即预测天然林樟子松规格材效果更好。

English Abstract

Evaluation of modulus of elasticity for dimension lumber by three nondestructive techniques

1. Key Laboratory of Wood Science and Technology of State Forestry Administration, Research Institute of Wood Industry, The Chinese Academy of Forestry, Beijing 100091, China

Received Date: 2007-05-10
Rev Recd Date: 2007-06-26
Publish Date: 2008-06-10

Keywords:

forest engineering /
transverse vibration /
longitudinal fundamental frequency vibration /
ultrasonic wave /
modulus of elasticity /
dimension lumber

Abstract: Dynamic bending modulus of elasticity of Mongolia scotch pine(Pinus sylvestris var. mongolica) full dimension lumber(38 mm×89 mm×4 000 mm) and Chinese fir (Cunninghamia lanceolata) plantation dimension lumber (45 mm×90 mm×2 500 mm) were tested by three non-destructive techniques, i.e. transverse vibration method, longitudinal fundamental frequency vibration method and ultrasonic wave method. At the same time, the static modulus elasticity of the above specimens were tested according to ASTM D198-99. The results showed that the value of dynamic and static modulus of elasticity followed the sequence as the following, Eusw > Efr > Etru > Etv, the relationship between dynamic and static modulus of elasticity concerning the three methods was significant at 0.01 level, indicating that all the three nondestructive methods could be used to predict the bending properties of dimension lumber. Furthermore, considering the operation of the equipment, longitudinal fundamental frequency vibration technique was the most accurate, convenient, reliable, easy and practical method. It was also found that the coefficient of determination(R2) obtained by using the three nondestructive techniques for Chinese fir plantation full dimension lumber was lower than that of Mongolia scotch pine full dimension lumber, estimating the static modulus elasticity of Mongolia scotch pine was more accurate than that of plantation Chinese fir.

江京辉, 吕建雄, 任海青, 骆秀琴, 龙超, 郭伟. 3种无损检测技术评估足尺规格材的静态弹性模量[J]. 浙江农林大学学报, 2008, 25(3): 277-281.

引用本文:

江京辉, 吕建雄, 任海青, 骆秀琴, 龙超, 郭伟. 3种无损检测技术评估足尺规格材的静态弹性模量[J]. 浙江农林大学学报, 2008, 25(3): 277-281.

Citation:

JIANG Jing-hui, Lü Jian-xiong, REN Hai-qing, LUO Xiu-qin, LONG Chao, GUO Wei. Evaluation of modulus of elasticity for dimension lumber by three nondestructive techniques[J]. Journal of Zhejiang A&F University, 2008, 25(3): 277-281.